BenQ GL2240 Bedienungsanleitung PDF herunterladen (Seite 7)

7 How to assemble your monitor hardware

3. How to assemble your monitor hardware

If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor.

Placing the screen surface on an object like a stapler

or a mouse will crack the glass or damage the LCD

substrate voiding your warranty. Sliding or scraping the

monitor around on your desk will scratch or damage

the monitor surround and controls.

Protect the monitor and screen by clearing a flat open

area on your desk and placing a soft item like the

monitor packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded

surface.

While holding the monitor firmly against the desk, pull

the monitor stand arm upwards clear of the monitor.

Orient and align the stand base socket with the end of

the stand arm, then push them together until they click

and lock into place.

Gently attempt to pull them back apart to check that

they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

You should position the monitor and angle the screen

to minimize unwanted reflections from other light

sources.

-5

~ +20

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Keine Kommentare

BenQ GL2240 Bedienungsanleitung Seite 7