BenQ MW853UST+ Bedienungsanleitung PDF herunterladen (Seite 30)

Operation30

Auto-adjusting the image

In some cases, you may need to optimize the picture quality. To do this, press

AUTO on the projector or remote control. Within 3 seconds, the built-in

Intelligent Auto Adjustment function will re-adjust the values of Frequency

and Clock to provide the best picture quality.

The current source information will be displayed in the upper left corner of

the screen for 3 seconds.

• The screen will be blank while AUTO is functioning.

• This function is only available when PC signal (analog RGB) is selected.

Fine-tuning the image size and clarity

Sharpen the image by rotating the FOCUS ring.

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably

wider at either the top or bottom. It occurs when the projector is not

perpendicular to the screen.

To correct this, besides adjusting the height of the projector, you can use

Auto Keystone or Keystone manually correct it following one of these

steps.

• Using the remote control

Press / on the projector or

remote control to display the Keystone

correction page. Press to correct

keystoning at the top of the image. Press

to correct keystoning at the bottom

of the image.

• Using the OSD menu

1. Press MENU/EXIT and then press ◄/► until the

Display menu is

highlighted.

2. Press ▼ to highlight Keystone and press MODE/ENTER. The

Keystone correction page displays.

3. Press to correct keystoning at the top of the image or press to

correct keystoning at the bottom of the image.

Press /.Press /.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 82 83

Keine Kommentare

BenQ MW853UST+ Bedienungsanleitung Seite 30