BenQ MP512 - SVGA DLP Projector Bedienungsanleitung PDF herunterladen (Seite 18)

Connection18

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the D-SUB OUT signal output socket on the projector to an external monitor

with a VGA cable following the instructions below:

To connect the projector to a monitor:

1. Connect the projector to a computer as described in "Connecting a computer" on page

17.

2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the

D-Sub input socket of the video monitor.

Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable

and connect the DVI end of the cable to the DVI input socket of the video monitor.

3. Connect the other end of the cable to the D-SUB OUT socket on the projector.

The final connection path should be like that shown in the following diagram:

• The D-Sub output only works when an appropriate D-Sub input is made to the projector.

• If you wish to use this connection method when the projector is in standby mode, make

sure the Standby D-Sub Output function is turned on in the SYSTEM SETUP: Advanced

menu. See "Standby D-Sub Output" on page 46 for details.

Notebook or desktop computer

VGA cable

MP522 ST

VGA to DVI cable

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

Keine Kommentare

BenQ MP512 - SVGA DLP Projector Bedienungsanleitung Seite 18