BenQ W600+ Bedienungsanleitung PDF herunterladen (Seite 32)

Operation32

English

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the

direction arrow keys for navigating the picture.

1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2. Press

to highlight Digital Zoom and press MODE/ENTER. The Zoom bar

displays.

3. Press on the projector repeatedly to magnify the picture to a desired size.

4. To navigate the picture, press MODE/ENTER to switch to the paning mode and

press the directional arrows ( , , , ) to navigate the picture.

5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out

functionality, and press AUTO to restore the picture to its original size. You can also

press repeatedly until it is restored to the original size.

The picture can only be navigated after the picture is magnified. You can further magnify the

picture while searching for details.

Playing 3D function

1. To enter the special preset mode, press MENU/EXIT and then press / until the

DISPLAY menu is highlighted, and press / to enable or disable 3D Sync. When

the 3D Sync is enabled, the current picture mode adjustment will be disabled.

2. To invert the image, press MENU/EXIT and then press / until the DISPLAY

menu is highlighted, and press / to enable or disable 3D Sync Invert.

3. 3D Requirement:

• PC: PC with graphic card with stereo capability ( Quad buffer feature) and can run

at 120Hz refresh rate.

• Video: standard NTSC DVD player to output 60Hz movie.

• 55% of the brightness will loss.

To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD devices

under the 3D Disc Menu.

Selecting the aspect ratio

The 'aspect ratio' is the ratio of the image width to the image height. For W600+, the default

aspect ratio is 16:9. Most analog TV and computers are in 4:3 ratio, and digital TV and

DVDs are usually in 16:9 ratio.

With the advent of digital signal processing, digital display devices like this projector can

dynamically stretch and scale the image output to a different aspect than that of the image

input signal.

To change the projected image ratio (no matter what aspect the source is):

1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2. Press

to highlight Aspect Ratio.

3. Press / to select an aspect ratio to suit the format of the video signal and your

display requirements.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

BenQ W600+ Bedienungsanleitung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren BenQ W600+