
Operation 51
English
FUNCTION DESCRIPTION
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 26 for details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors.
See "Choosing a location" on page 15 for details.
Menu
Settings
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting On allows the projector to remind you to clean the filter.
Operation
Settings
Direct Power On
Powers projector on automatically when the power cable is connected.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time.
See "Setting Auto Power Off " on page 55 for details.
Quick Cooling
Enables or disables the Quick Cooling function.
Selecting On enables the function and the projector cooling time will
be shortened from a normal 90 second duration to approximately 2
seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen.
See "Hiding the image" on page 42 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Remote
Receiver
Sets the preferred remote receiver (Front and Top) allowing the
projector to accept signals from the remote control.
Background
Color
Selects background appearance when there is no signal.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up. Four options are available: BenQ logo, Black screen, Blue
screen.
4. SYSTEM SETUP: Basic
menu
BenQ W703D.book Page 51 Friday, November 25, 2011 9:49 AM
Kommentare zu diesen Handbüchern